How do I enable the TRS stereo input on Flint?

The input on Flint can be set for either mono input or TRS stereo input. Flint ships in mono configuration from the factory.

To adjust the configuration.

1. Remove the back cover of your pedal.
2. On the left side of the circuit board, you’ll see a jumper that can be set in two positions.
   • Place the jumper on the left 2 pins for TRS stereo input.
   • Place the jumper on the right 2 pins for mono input.

In order to use the TRS stereo input, you’ll need a TRS stereo input adapter like the one shown below. You can purchase one here.