Expand Your Flexibility.
From recalling presets to tapping in tempos, MiniSwitch adds another layer of functionality to your Strymon pedals at the press of a button.
Tap Tempos
Place MiniSwitch anywhere on your pedalboard and tap in your tempos remotely with ease. Perfect for large rigs or boards where pedals compete for real estate.
Recall A Favorite
With MiniSwitch, recalling your Favorite setting is a snap. Select between your Favorite setting and the current state of the knobs on your pedal. It’s like having two presets to choose between.
Freeze And Infinite
Play a note or chord and infinitely capture and sustain Cloudburst’s reverb in Freeze mode with MiniSwitch, giving you lush pads to play and experiment over.
In Infinite mode, press and hold MiniSwitch to hear reverb applied indefinitely to your entire signal for reverb trails that last forever.
Choose Your Speed
Want to remotely toggle Lex’s Slow/Fast setting? MiniSwitch lets you slow down or speed up your Lex Rotary modulation speed at the press of a button.
Boost Your Signal
Use MiniSwitch to engage the Boost feature within our Riverside Multistage Drive pedal. Boost your overall output signal by up to +6dB when you need to jump out in the mix.
HOW TO USE
1. Set MiniSwitch to Tap or Fav Mode
MiniSwitch ships in Fav mode (stays on when pressed once), used for recalling a Favorite, engaging Riverside’s boost, toggling Lex’s speed setting, or for enabling Cloudburst’s Infinite and Freeze modes without having to keep the footswitch pressed.
MiniSwitch can also be used in Tap mode (stays on only when footswitch is held). Use this mode for tap tempo, or to momentarily engage Riverside’s boost or Cloudburst’s Infinite/Freeze. To set MiniSwitch to momentary mode, unscrew the back panel using a Phillips-head screwdriver. Then locate the plastic jumper and set to Tap mode.
2. Connect MiniSwitch
Use the included TRS cable to connect MiniSwitch to your desired pedal.
2. Configure Your Pedal
Set your pedal’s EXP jack to whatever functionality you’d like MiniSwitch to control. Refer to each pedal’s user manual for specific instructions. Once you’ve done that, you’re good to go!
Compatability
| Mode | Description | Compatibility |
| Tap Mode | Allows you to tap in a tempo remotely for compatible pedals. | BigSky, Deco V2, DIG, DIG V2, El Capistan V2, Flint, Flint V2, Lex V2, Mobius, TimeLine, Volante, Zelzah |
| Favorite Mode | Provides access to a Favorite setting. Remotely toggles between Favorite setting and regular setting for pedals with an onboard Favorite switch. | blueSky V2, Brigadier, Cloudburst, Compadre, Deco, Deco V2, DIG, DIG V2, El Capistan, El Capistan V2, Flint, Flint V2, Iridium, Lex, Lex V2, Riverside, Sunset, Zelzah |
| Boost Mode | Adds up to a +6dB boost to Riverside. | Riverside |
| Freeze/Infinite Mode | Engages Cloudburst's Freeze/Infinite functionality. | Cloudburst |
Specs
- Switch between Favorite/Boost mode (latching) and Tap Tempo mode (momentary) via an internal jumper
- Favorite/Boost mode (latching): Recall a saved favorite preset, compatible with Brigadier, Compadre, Deco, DIG, El Capistan, Flint, Iridium, Lex, and Riverside
- Toggle rotary speaker speed, compatible with Lex
- Engage up to +6db boost, compatible with Riverside
- Tap Tempo mode (momentary): Remotely tap in tempos, compatible with BigSky, Deco, DIG, Flint, Mobius, and TimeLine
- Engage Freeze/Infinite mode on Cloudburst
- 1/4″ TRS cable included
- No additional power supply required
- Rugged black anodized aluminum chassis
- Super small and lightweight: measures 2″ W x 2.25″ D x 1.8″ H
- Designed and built in the USA