How do I set up my Flint to work with MultiSwitch Plus?

To configure your Flint and MultiSwitch Plus to work with each other:

Press and hold the TREMOLO ON footswitch while connecting power to the pedal. Hold until both LEDs stop blinking.
Turn the INTENSITY knob all the way counter-clockwise to set the MIDI channel to Channel 1. The TREMOLO ON LED should be GREEN.
Turn the DECAY knob to select any of the following options:
- Send MIDI CC, PC, and Other Data: WHITE
- Send MIDI CC and Other Data: GREEN
- Send MIDI PC and Other Data: PURPLE
- Send Other Data: AMBER
Turn the MIX knob all the way clockwise to set the EXP/MIDI jack to MIDI mode.The REVERB ON LED should be BLUE.
Press either footswitch to exit and store the MIDI channel, the MIDI OUTPUT setting, and the EXP/MIDI jack mode.
Connect a TRS cable to Flint’s EXP/MIDI jack.
Press and hold the A footswitch on MultiSwitch Plus while connecting the TRS cable to any one of the three jacks to set it to Preset mode.

To save a preset on Flint with MultiSwitch Plus:

Dial in the sound that you would like to save as your preset on Flint.
Press and hold both footswitches on Flint until both the LEDs blink GREEN.
Press the A, B, or C footswitch on MultiSwitch Plus to save the current state of the pedal to the desired location.

To select a preset on Flint with MultiSwitch Plus: