How can I set Sunset’s noise reduction?
Sunset has an optional, variable-threshold noise reduction feature to tame hum, buzz, and system noise when you’re not playing. To use the noise reduction:
- Press and hold the B footswitch for a few seconds until the A LED blinks.
- Release the B footswitch and turn the A channel LEVEL knob past the 12 o’clock position to engage the Noise Reduction. The A channel LED will change from GREEN to AMBER at the 12 o’clock position to indicate the Noise Reduction has been engaged.
- Turning the A channel LEVEL knob past 12 o’clock increases the Noise Reduction threshold for louder and noisier setups. The A channel LED will change from AMBER to RED to indicate the increased Noise Reduction threshold level.
- Press the A or B channel footswitches to store the new Noise Reduction setting to the Sunset.
NOTE: The Noise Reduction setting can be saved independently for the Favorite preset and manual settings on Sunset. To do this, set the Noise Reduction level before saving your Favorite preset. Once your Favorite preset has been saved, change the Noise Reduction setting to work with your manual setting.