How do I adjust the stereo spread of the 4-Stage and 6-Stage phasers on Zelzah?

When Zelzah is connected for stereo output, you can adjust the stereo spread of the 4-Stage and 6-Stage phasers from narrow to a wide stereo image independently of each other.

To adjust stereo spread for each of the phasers:

• When the pedal is already powered up, press and hold the ON (6-STAGE) footswitch.  Once both LEDs flash, release the footswitch.
  • Turn the DEPTH (4-STAGE) knob to adjust the stereo spread of the 4-Stage phaser.  Both LEDs will momentarily change color smoothly from GREEN (narrow – default) to AMBER (wide) to indicate the current status as the knob is turned.
  • Turn the DEPTH (6-STAGE) knob to adjust the stereo spread of the 6-Stage phaser.  Both LEDs will momentarily change color smoothly from GREEN (narrow – default) to AMBER (wide) to indicate the current status as the knob is turned.
• Press either footswitch to exit and store the Stereo Spread settings.

*NOTE: Stereo Spread is not applied when Split Signal Routing is selected.

**NOTE: Stereo Spread settings are saved independently per Favorite setting or MIDI preset.