How do I perform a factory reset on Compadre?

You can perform a factory reset to wipe all custom settings and restore all factory presets and power up modes.

To perform a factory reset:

• Press and hold the COMP footswitch while connecting power to the pedal.
• Once both LEDs flash, release the footswitch.
• Sweep the DRY knob from 0% to 100% twice to RESET; status on both LEDs.
  • Turn 1 – AMBER
  • Turn 2 – RED
  • Turn 3 – AMBER
  • Turn 4 – Both LEDs blink RED, pedal resets, and power cycles
• After the pedal power cycles during the reset, it is ready to use again.