How do I set the DRY SIGNAL mode on Olivera?

The Dry Signal can be set in one of three different modes.

• Digital Mode uses the converted dry signal and allows the MIX knob to dial out the dry signal when turned past the 3 o’clock position.

• Analog Mode keeps the dry signal in analog.*

• Kill Dry Mode mutes the analog dry path signal, allowing the MIX knob to strictly control the “wet” effect output level. This is often preferable if using Olivera within an amp’s parallel effects loop or a mixer’s aux or effects send.

To change the DRY SIGNAL mode:

• Press and hold the footswitch for at least 2 seconds while powering up Olivera. Once the LED flashes RED, release the footswitch.
• Turn the INTENSITY (DRY SIGNAL) knob to select one of the three Dry Signal options. The LED will change color to indicate the current status as you turn the knob.
  • Digital Mode: GREEN (default, minimum knob position)
  • Analog Mode: RED (50% knob position)
  • Kill Dry Mode: BLUE (maximum knob position)
• Press the footswitch to store the Dry Signal setting and begin using Olivera.