How do I set the EXP input to work with a Tap/Favorite switch on the DIG?

To set the EXP input to TAP switch mode:

• Unplug power to the pedal.
• Set the two toggle switches to the bottom setting for DEEP and 12-Bit.
• Press and hold down both the TAP and Bypass switches as you plug in the power supply.
• Continue holding down the switches for about 5 seconds before releasing.
  • A TAP switch connected to the EXP input will control the TIME knob for Delay 1 on the Dig.

To set the EXP input to Favorite switch mode:

• Unplug power to DIG.
• Set the two toggle switches to the middle setting for LIGHT and ADM.
• Press and hold down both the TAP and Bypass switches as you plug in the power supply.
• Continue holding down the switches for about 5 seconds before releasing.
  • To save a Favorite setting, press and hold the BYPASS switch for a few seconds until the BYPASS light turns back on.