Free US Shipping On Orders Over $49

Easy 30-Day Returns

Financing Available Through Affirm logo

Previous slide
Next slide

How do I set up my DIG to work with MultiSwitch Plus?

To configure Dig and MultiSwitch Plus to work with each other:

  • Press and hold the TAP footswitch while connecting power to the pedal.Hold until both LEDs stop blinking.

  • Turn the TIME knob all the way counter-clockwise to set the MIDI channel to Channel 1. The TAP LED should be GREEN.

  • Turn the TONE knob to select any of the following MIDI OUT options (both LEDs will show the following indicated colors):
    • Send MIDI CC, PC, and Other Data: WHITE
    • Send MIDI CC and Other Data: GREEN
    • Send MIDI PC and Other Data: PURPLE
    • Send Other Data: AMBER
  • Turn the MIX knob all the way clockwise to set the EXP/MIDI jack to MIDI mode. The ON LED should be BLUE.

  • Press either footswitch to exit and store the MIDI channel, the MIDI OUT setting, and the EXP/MIDI jack mode.

  • Connect a TRS cable to DIG’s EXP/MIDI jack.

  • Press and hold the A footswitch on MultiSwitch Plus while connecting the other end of the TRS cable to any one of the three jacks to set it to Preset mode.

To save a preset on DIG with MultiSwitch Plus:

  • Dial in the sound that you would like to save as your preset on DIG.

  • Press and hold both footswitches on DIG until both the LEDs blink GREEN.

  • Press the A, B, or C footswitch on MultiSwitch Plus to save the current state of the pedal to the desired location.

To select a preset on DIG with MultiSwitch Plus:

  • Step on a switch that is not illuminated to recall the corresponding preset.

  • Step on an illuminated switch to bypass DIG.