How do I set up my El Capistan to work with MultiSwitch Plus?

To configure your El Capistan and MultiSwitch Plus to work with each other:

Press and hold the TAP footswitch while connecting power to the pedal. Hold until both LEDs stop blinking.
Turn the TIME knob all the way counter-clockwise to set the MIDI channel to Channel 1. The TAP LED should be GREEN.
Turn the TAPE AGE knob to select the preferred MIDI OUTPUT options:
- Send MIDI CC, PC, and Other Data: WHITE
- Send MIDI CC and Other Data: GREEN
- Send MIDI PC and Other Data: PURPLE
- Send Other Data: AMBER
Turn the MIX knob all the way clockwise to set the EXP/MIDI jack to MIDI mode. The ON LED should be BLUE.
Press either footswitch to exit and store the MIDI channel, the MIDI OUTPUT setting, and the EXP/MIDI jack mode.
Connect a TRS cable to the EXP/MIDI jack on El Capistan.
Press and hold the A footswitch on MultiSwitch Plus while connecting the TRS cable to any one of the three jacks to set it to Preset mode.

To save a preset on El Capistan with MultiSwitch Plus:

Dial in the sound that you would like to save as your preset on El Capistan.
Press and hold both footswitches on El Capistan until both LEDs blink GREEN.
Press the A, B, or C footswitch on MultiSwitch Plus to save the current state of the pedal to the desired location.

To select a preset on El Capistan with MultiSwitch Plus: