How do I set up my Flint to work with MultiSwitch Plus?
To configure your Flint and MultiSwitch Plus to work with each other:
-
Press and hold the TREMOLO ON footswitch while connecting power to the pedal. Hold until both LEDs stop blinking.
-
Turn the INTENSITY knob all the way counter-clockwise to set the MIDI channel to Channel 1. The TREMOLO ON LED should be GREEN.
- Turn the DECAY knob to select any of the following options:
- Send MIDI CC, PC, and Other Data: WHITE
- Send MIDI CC and Other Data: GREEN
- Send MIDI PC and Other Data: PURPLE
- Send Other Data: AMBER
-
Turn the MIX knob all the way clockwise to set the EXP/MIDI jack to MIDI mode.The REVERB ON LED should be BLUE.
-
Press either footswitch to exit and store the MIDI channel, the MIDI OUTPUT setting, and the EXP/MIDI jack mode.
-
Connect a TRS cable to Flint’s EXP/MIDI jack.
-
Press and hold the A footswitch on MultiSwitch Plus while connecting the TRS cable to any one of the three jacks to set it to Preset mode.
To save a preset on Flint with MultiSwitch Plus:
-
Dial in the sound that you would like to save as your preset on Flint.
-
Press and hold the TREMOLO footswitch on Flint until both the LEDs blink GREEN.
-
Press the A, B, or C footswitch on MultiSwitch Plus to save the current state of the pedal to the desired location.
To select a preset on Flint with MultiSwitch Plus:
-
Step on a switch that is not illuminated to recall the corresponding preset.
-
Step on an illuminated switch to bypass Flint.