How do I use PCH X2 in a Live Setting?

Connect your instruments: a guitar, bass, piezo pickup/acoustic
instrument, amp + cab pedal/modeling device, keyboard, etc., to PCH
X2’s Left or Right IN, or to the Left and Right INs for stereo input.

Connect PCH X2’s Left THRU Out to the input of your guitar or bass
amplifier, 1/4” FRFR amp input, or other unbalanced input gear.
If using both INs, connect each respective THRU Out to separate
amplifiers.

PCH X2 requires 48V phantom power. Mute the input channels on the
mixer or interface before connecting PCH X2 to its XLR inputs. Once
connected, enable the mixer or interface’s phantom power and then
unmute the input channels in use.

• Slowly increase the volume on all devices.
• Set PCH X2’s HPF switch to 80 or 240 to reduce low-end rumble or muddiness as needed.
• Set PCH X2’s LIFT/GND switches to LIFT if experiencing ground
hum.