How do the CV Clock outputs work on Magneto?

CLK 1- 4 OUTs send clock outputs of Playback heads 1-4. Dependent on the HEADS switch setting and the ECHO/LOOP/SAMPLE mode setting, output clocks are always at 50% duty cycle and are phase aligned with incoming Clock or Tap signals. Examples below are for a clocked or tapped delay time of 1000ms.

ECHO MODE

EVEN:

CLK 1 OUT: 1/16 note clock output (ex. 250ms)
CLK 2 OUT: 1/8 note clock output (ex. 500ms)
CLK 3 OUT: dotted 1/8 note clock output (ex. 750ms)
CLK 4 OUT: 1/4 note clock output (ex. 1000ms)

TRIPLET:

CLK 1 OUT: 1/16 note triplet clock output (ex. 167ms)
CLK 2 OUT: 1/8 note triplet clock output (ex. 333ms)
CLK 3 OUT: 1/4 note triplet clock output (ex. 667ms)
CLK 4 OUT: 1/4 note clock output (ex. 1000ms)

SHIFT:

CLK 1 OUT: 1/8 note triplet clock output (ex. 333ms; 3x speed)
CLK 2 OUT: 1/8 note clock output (ex. 500ms; 2x speed)
CLK 3 OUT: 1/2 note clock output (ex. 2000ms; half speed)
CLK 4 OUT: 1/4 note clock output (ex 1000ms; full speed)

In LOOP and SAMPLE modes, CLK1, CLK2, and CLK3 are the same as in ECHO mode, but CLK4 is the loop or sample length clock output.