Open the disk image, then, drag and drop the “Strymon Impulse Manager” icon to the “Applications” folder.
Double click the “Strymon Impulse Manager 1.00.2” installer.
Strymon Impulse Manager, version 220.127.116.11:
Minimum System Requirements
Mac 10.14 – 10.15
To connect your Iridium pedal to the Strymon Impulse Manager software, connect your powered Iridium to your computer using the USB-mini cable that is included with the pedal. Once connected, start the Strymon Impulse Manager software.
Once you have connected your powered Iridium to the computer using the included USB-mini cable, start the Strymon Impulse Manager application. The program will automatically detect the connected pedal.
The center of the program shows Iridium’s 9 Cab Slots (3 per AMP type) and will automatically populate with the contents from the connected pedal’s memory. Each Cab Slot contains 2 mono or 1 stereo impulse response (IR) file along with the respective name for each slot.
- To select a Cab Slot for editing or auditioning new IRs, click anywhere in the cab slot. Clicking on the Info button (letter “i” in a circle) on the selected Cab Slot will bring up a window with sliders to adjust the LEVEL, TREBLE, and BASS settings of the selected Cab Slot.
- By default, the adjustment sliders for LEVEL, TREBLE, and BASS are locked to adjust both the LEFT and RIGHT channels together when used. However, you can un-check the “Match left channel” checkbox to adjust these settings independently for each side.
At the bottom of this window, there is a Cab Notes field where you can enter details on your cab settings. For the factory cabs that are included with Iridium, the Cab Notes field shows the IR vendor that provided us with the IR cab file(s) in the currently selected Cab Slot.
Once you have made your changes in the Info window, press the ACCEPT button to close this window.
On the right side of the application is the Saved Collections column. Each collection is a snapshot of the IR cab file settings of your Iridium pedal saved as a folder containing all 9 IR cabs from the pedal’s memory.
At the top of this column, you will find a copy of the Strymon Factory Cabs that come with Iridium along with some additional cab collections put together by some of the IR cab vendors that partnered with us.
- You can expand any of the collections by clicking on the arrow to the left of the collection name to see the 9 cab files that make up the collection.
- You can replace any of the cabs in Iridium’s memory by dragging and dropping any of the cabs from an expanded collection into any of the 9 Cab Slots in the center of the application.
- To save a new collection made up of the current settings on your Iridium pedal, click on the Save Collection button at the bottom of the application.
- A new window will pop up for you to name your new collection. Once you have named you new collection, click on the SAVE button and the collection will appear in the Saved Collections column below the default factory and vender cab collections.
- Saved collections are stored in /Users/[username]/Documents/Strymon/collections on both Mac and Windows computers.
On the left side of the application is the Impulse Responses column where you can browse your computer’s hard drive for any 3rd party or custom 24-bit 96 kHz impulse response wave files of up to 500ms in length that you own.
- You can drag and drop compatible IR files from the Impulse Responses column into the LEFT, RIGHT, or Mono section of the Cab Slots to customize your Iridium cabs with your own IR files.
- You can also create a new cab collection made up of your own custom or 3rd party IR files by clicking on the Save Collection button, naming your new collection in the window that appears, and clicking SAVE.
Syncing Changes to the Pedal
- When you are satisfied with the edits made to Iridium’s Cab Slots, click the SYNC CHANGES button to write the new settings to the connected pedal’s memory.
- At the top of the Strymon Impulse Manager window, click on the Help button (question mark in a circle) to bring up the help tutorial which provides useful at-a-glance info on how to use the application.
- You can re-name your pedal by clicking on the text to the right of the small pedal graphic above the Cab Slots.
- Clicking on the gear icon next to it will bring up a window to show you the status of the connected pedal and its firmware version.
- Lastly, click on the HELP menu option at the top of the screen (or Window) for additional help in acquiring new IRs from the vendors we partnered with to use with Iridium. You can also access the Help tutorial or contact Strymon technical support via email from this menu.
Iridium is compatible with mono or stereo 24 bit 96 kHz wave (.wav) files up to 500ms in length. Only wave files with these specifications will be loaded to the pedal. Any IR files that do not meet this criteria will be rejected by the Strymon Impulse Manager application.
With Iridium, you can use compatible 24 bit/96kHz ‘Null Cab’ IR files to use as a ‘bypassed cab’ that you can load to either side (LEFT or RIGHT or BOTH) of the 9 Cab Slots with the Strymon Impulse Manager software.
The ‘Null Cab’ files are useful for bypassing one or both sides of the speaker cab processing on Iridium for different routing options.
Null Cab Mono
Null Cab Stereo
Loading Null Cab IRs to Iridium
- Download the mono or stereo Null Cab IR file(s) above to save on your computer.
- Open the Strymon Impulse Manager software and navigate to the dowloaded ‘Null Cab’ IR’s with the Impulse Responses browsing folder at the top left of the application.
- Drag the ‘Null Cab’ IR file to the desired Cab Slot:
- You can drag the ‘Null Cab Mono’ IR file into either the LEFT or RIGHT (or both) sides of each Cab Slot.
- The ‘Null Cab Stereo’ IR file will replace both sides (LEFT and RIGHT) of the Cab Slot.
- NOTE: The ‘Null Cab’ IR files are a bit loud, so make sure to adjust the IR level settings in the ‘info’ box for the selected Cab Slot.
- Click ‘Sync Changes’ when you are done editing to save the changes to Iridium’s memory.