Clipping or Distorted Audio from BigSky Plug-In

If you are experiencing clipping or distorted audio when using the BigSky Plug-in, it is possible that either the INPUT or OUTPUT level settings 0f the plug-in may be set too high and causing the undesired audio.

The INPUT knob controls the input signal level fed into the plug-in.  If the signal level sent to the plug-in is too high, this can result in distorted audio.  Try turning down the INPUT level to see if that alleviates the distorted audio, especially when using a hot input signal level from external or virtual instruments.

The OUTPUT knob controls the overall output level of the dry signal and processed reverb from the plug-in.  If the signal level from the plug-in is set too high, this can also result in distorted audio.  Try turning down the OUTPUT level to see if that clears up the distorted audio, especially when using big reverb sounds with high MIX settings and pronounced low frequencies..