Free US Shipping On Orders Over $49

Easy 30-Day Returns

Financing Available Through Affirm logo

Previous slide
Next slide

How do I configure the EXP/ MIDI jack on cloudburst?

To configure the EXP/MIDI jack on cloudburst:

  • Press and hold the footswitch for at least 2 seconds while connecting cloudburst to power.  Once the LED flashes, release the footswitch.
  • Turn the MIX knob to select the function of the rear panel’s EXP/MIDI jack.  The LED will change color to indicate the current status as you turn the knob.
    • Expression Pedal mode: GREEN (default, minimum) – Allows continuous control over any of the knobs in any direction with a standard TRS expression pedal.
    • Favorite mode: AMBER (11 o’clock) – Allows you to recall a Favorite setting using a Strymon MiniSwitch (or a MultiSwitch Plus set to TAP/FAV/BOOST mode).
    • Freeze mode: RED (12 o’clock) – Using a Strymon MiniSwitch (or MultiSwitch Plus** set to TAP/FAV/BOOST mode), allows for infinitely sustained reverberation of the current input signal without new notes played being added to the reverb.
    • Infinite mode: PURPLE (2 o’clock) – Using a Strymon MiniSwitch (or MultiSwitch Plus** set to TAP/FAV/BOOST mode), allows for infinitely sustained reverberation of the current input signal with new notes played being added to the reverb.
    • MIDI mode: BLUE – Allows for the selection of three presets using a Strymon MultiSwitch Plus. Full MIDI functionality is available by sending MIDI Program Change messages via 1/4″ TRS MIDI connection using a Strymon Conduit or MIDI EXP cable. Up to 300 presets are available via MIDI.
  • Press the footswitch to store the EXP/MIDI jack mode and begin using cloudburst.

** Please note that MultiSwitch Plus does not have a custom mode for Cloudburst, and will function the same as MiniSwitch when used with Cloudburst to control FREEZE/ INFINITE mode.