How do I configure the EXP/MIDI jack on Deco?

Press and hold the TAPE SATURATION ON footswitch while powering up Deco. Once both LEDs flash, release the footswitch.
Turn the LAG TIME knob to select the function of the rear panel’s EXP/MIDI jack. The DOUBLETRACKER ON LED will change color to indicate the current status as you turn the knob.
- Expression Pedal mode: GREEN (default) – Allows continuous control over any of the knobs in any direction with a standard TRS expression pedal.
- Favorite mode: AMBER – Allows you to recall a Favorite setting using a Strymon MiniSwitch.
- Tap mode: RED – Allows you to set the master delay time via tap tempo using a Strymon MiniSwitch.
- MIDI mode: BLUE – Allows for the selection of three presets using a Strymon MultiSwitch Plus. Full MIDI functionality is available by sending MIDI Program Change messages via 1/4″ TRS MIDI connection using a Strymon Conduit or MIDI EXP cable. Up to 300 presets are available via MIDI.
Press either footswitch to store the EXP/MIDI jack mode and begin using Deco.