MiniSwitch support

Tap Favorite has been discontinued and replaced with MiniSwitch.

They are nearly identical, aside from the name, and how the footswitch operates. MiniSwitch operates on the down press of the footswitch, Tap Favorite operates on the release of the footswitch. This change was made to ensure the smoothest operation as an external Boost switch with our new Riverside drive pedal.

Learn more about MiniSwitch.

MiniSwitch can be used as a tap tempo switch with BigSky, DIG, Deco, Flint, Mobius, and TimeLine.  To set up your MiniSwitch for Tap Tempo mode, follow these steps:

1. Unscrew the four screws on the bottom of the chassis.
2. Once opened, locate the small jumper underneath the circuit board and switch it from the center and right pins to the center and left pins. Please see the image below.

Once you have the MiniSwitch configured to Tap Tempo Mode you still need to make sure your Strymon pedal is set up to recognize an external tap tempo pedal.

Flint/DIG

Power up while making sure that both conditions below apply:

1. Both toggle switches are in the DOWN position
2. You are pressing both footswitches simultaneously.
3. Release the footswitches after 5 seconds to use the pedal.

Deco

1. Power up holding BOTH footswitches.
2. While holding down both footswitches, turn the SATURATION knob to the 12 o’clock noon position to use MiniSwitch as a Tap Tempo switch to control the LAG TIME of the Doubletracker.
3. Release the footswitches to use the pedal.

TimeLine/BigSky/Mobius

1. Press and hold the Value knob for 2 seconds to access the Globals menu.
2. Scroll through the menu options until you see EXP MD (this stands for “Expression Mode”).
3. Once there, press down on the VALUE knob.
4. Turn the VALUE knob to set the mode for TAP.
5. Press the TYPE knob to exit the Global menu.

MiniSwitch can be used as a Favorite preset select switch with Brigadier, Deco, DIG, El Capistan, Flint, Lex, and Riverside.

MiniSwitch can also be used to engage the Boost feature on Riverside.

By default, MiniSwitch ships from the factory in Favorite/Boost mode. You do not need to adjust the internal jumper on MiniSwitch unless you have already switched to Tap Tempo mode.

To switch back to Favorite mode:

1. Unscrew the four screws on the bottom of the chassis.
2. Once opened, locate the small jumper underneath the circuit board and switch it from the center and left pins to the center and right pins. Please see the image below.

Once you have your MiniSwitch configured to Favorite/Boost mode, you still need to make sure your Strymon pedal is configured to recognize the switch.

Favorite Mode setup for Brigadier, DIG, El Capistan, and Flint

1. Set both toggles to the middle position.
2. Power up holding both footswitches.
3. Release the footswitches after 5 seconds to begin using the pedal.

Favorite Mode setup for Deco

1. Power up holding BOTH footswitches.
2. While holding down both footswitches, turn the SATURATION knob full clockwise to use MiniSwitch as a Favorite preset select switch.
3. Release the footswitches after 5 seconds to begin using the pedal.

Favorite Mode setup for Lex

1. Power up holding BOTH footswitches.
2. While holding down both footswitches:

• Turn the FAST ROTOR SPEED knob full clockwise to use MiniSwitch as a Favorite preset select switch
• OR – Turn the FAST ROTOR SPEED knob to the 12 o’clock noon position to use MiniSwitch as an external rotary speed switch.

Favorite Mode setup for Riverside

1. Press and hold the FAVORITE footswitch at power up until both LEDs flash.
2. To enable Favorite In for the EXP jack, turn the LEVEL knob fully clockwise. The ON LED will light up RED.
3. Press the ON or FAVORITE footswitch once again to store this setting and begin using Riverside.

Boost Switch setup for Riverside

1. Press and hold the FAVORITE footswitch at power up until both LEDs flash.
2. To enable the BOOST switch for the BOOST jack, turn the DRIVE knob counter-clockwise. The FAVORITE LED will light up GREEN.
3. Press the ON or FAVORITE footswitch once again to store this setting and begin using Riverside.

MiniSwitch is 2″ W x 2.25″ D x 1.8″ H.

Strymon Non-Transferrable Limited Warranty

Warranty

Strymon warranties its products and their varying components to be free from defects in material and workmanship for the following periods of time from the original date of purchase when purchased from an Authorized Strymon Dealer:

• Effects Pedals
  • 2 Years – Iridium, Riverside, Sunset, Volante,
  • 1 Year – BigSky, blueSky, Brigadier, Deco, DIG, El Capistan, Flint, Lex, Mobius, OB.1, Ola, Orbit, TimeLine
• Eurorack Modules
  • 2 Years – AA.1, Magneto
• Power Supplies
  • 5 Years – Zuma, Zuma R300, Ojai, Ojai R30
  • 1 Year – Factory power supplies for pedals
• Accessories
  • 1 Year – MiniSwitch, MultiSwitchPlus, original MultiSwitch, MIDI EXP Cables, DC Power Cables, EIAJ-05 Link Cables, 24V Power Adapter for Ojai/Ojai R30, Polarity Reversal Adapters, Voltage Doubler Adapters, Daisy-Chain Power Cables

If the product fails within the warranty period, Strymon will repair or, at our discretion, replace the product at no cost to the original purchaser.

Exclusions

This warranty covers defects in manufacturing discovered while using this product as recommended by Strymon. This warranty does not cover loss or theft, nor does the coverage extend to damage caused by misuse, abuse, unauthorized modification, improper storage, lightning, or natural disasters. Damage caused by any of the above circumstances may result in a non-warranty repair fee.

Products that were purchased from an unauthorized dealer are not covered under warranty.  The warranty is non-transferrable and does not cover used or second-hand products.

Limits of Liability

In the case of malfunction, the purchaser’s sole recourse shall be repair or replacement, as described in the preceding paragraphs. Strymon will not be held liable to any party for damages that result from the failure of this product. Damages excluded include, but are not limited to, the following: lost profits, lost savings, damage to other equipment, and incidental or consequential damages arising from the use, or inability to use this product. In no event will Strymon be liable for more than the amount of the purchase price, not to exceed the current retail price of the product. Strymon disclaims any other warranties, express or implied. By using the product, the user accepts all terms herein.

How to Obtain Service Under this Warranty

For North American customers: Contact Strymon through our website at https://www.strymon.net/support for Return Authorization and information. Proof of original ownership may be required in the form of a purchase receipt.

For International Customers: Contact the Strymon dealer from which the product was purchased from in order to arrange warranty repair service.

To locate your nearest authorized Strymon dealer, please use the following link:

Authorized Strymon Dealers

You can also contact Strymon directly at (805) 468-8788 or (800) 980-8160 for help finding your nearest authorized Strymon dealer.

Strymon products purchased from an authorized dealer are covered by a manufacturer’s warranty.  A purchase receipt from an authorized dealer is required with any request for warranty service.

Please note that any Strymon products that have been purchased from an unauthorized dealer are not eligible for coverage under the manufacturer’s warranty. If you are uncertain, please contact Strymon directly at (805) 468-8788 or (800) 980-8160 before your purchase.

***NOTE: Warranties for Strymon products are non-transferrable.  Second-hand items, including sales from websites such as craigslist, Ebay, and Reverb are not covered by a manufacturer’s warranty.  Furthermore, there are no authorized dealers on Amazon, Ebay, or Reverb selling “NEW” Strymon products in the USA.***

Your warranty is valid in the region of purchase. For example, if you buy your product in Japan, any service-related issues will need to be handled in Japan. Products purchased in the United States can only be repaired in the United States.